具體職責 Job Details:
1. Run CMM programs according sampling frequency established in control plans按照控制計劃對周期報檢樣件進行三坐標檢測。
2. Evaluation of measurement results according specs and tolerances.
按相應的規格和公差給出評價測量報告
3. Responsible to isolate non-conforming product and execute reaction plan (preventative attitude and quick response) for deviations found during a CMM, inspection, measurement and test equipment programs routine.
負責三坐標的日常點檢,通過三坐標測量及時快速的反映不合格產品隔離并執行反映計劃。
4. Validates coordinate points, statistical process control and significant characteristics
確認三坐標測量數據有效,具有統計過程控制和重要特性
5. Supports and assists the CAD Engineer in preparing response to request for CAD services.
支持和幫助CAD工程師準備CAD數據
6. Develop technical illustrations - (isometric) as needed
按需開發技術插圖
7. Run translations on received product data
能轉換所收到的產品數據
8. Assures that CAD information is received, transmitted, and stored in an orderly and timely manner有秩序的存儲,接收,傳遞的CAD信息。
9. To improve the safety, occupational health and environment protection related with work flow and equitment management.
針對工作流程和相關設備管理,進行安全、職業健康和環境保護的相關改善工作。
任職資格和要求 Qualifications and Requirements
1. 2 plus years of Calibration and verification of measuring equipment inspection and testing experience
兩年以上使用測量設備,校準和測試經驗。
2. 2 plus years of Training Laboratories coordinates measuring machines experience.
兩年以上使用三坐標測量機經驗
3. General working knowledge of blueprint reading, GD&T。
看懂圖紙,GD&T
4.accept the night work
能接受夜班
職位福利:五險一金、節日福利、補充醫療保險、定期體檢、帶薪年假、采暖補貼、年底雙薪、績效獎金