崗位職責:
· Responsible for working out the annual and monthly maintenance plan for equipment
負責制定年度、月度設備維護計劃;
· Supervise and check the implementing of maintenance plan for equipment, continuous adjusting and improve the maintenance plan for equipment.
監督檢查設備維護計劃的執行,并做持續調整和改進;
· Working out the improvement schemes for equipment problem that are found out in equipment maintenance and then organize implementation, take part in working out improvement schemes for tooling problems.
對設備中發現的設備問題制訂改進方案并組織實施,對工裝問題參與制訂改進方案;
· Guide to solve the emergency happening regarding the equipment and tooling, the failure that can’t be solved need to report to the department manager.
指導解決設備、工裝出現的突發事件,對不能解決的故障上報部門經理;
· Draw up and update the annual safety inventory for spare parts and then monthly check the actual inventory, optimize the safety inventory for spare parts existing problems.
編制和更新備件年度安全庫存并每月檢查實際的庫存,對有問題的備件安全庫存進行優化;
· Summarize,improve and track monthly as well as weekly the failure analysis of equipment.
每月、每周的設備故障分析匯總和改進跟蹤;
· Work out the annual budget for equipment maintenance and then monitor the budget.
制定年度設備設施維護預算,并對預算進行監控;
· Responsible for assessment monthly performance for the maintenance personnel, work out the improvement plan for employee of unqualified performance.
負責月度維修人員績效的評定,對績效不合格員工制定改進計劃;
· Cooperate with process and quality to achieve all kinds of improvement in products and quality.
配合工藝及質量做好各項產品改進及質量改進工作;
· Confirm the quality status of equipment and tool for outsourcing of repair and
maintenance.
對外委維修和維護設備、工具的質量狀態進行確認;
· Bachelor or above degree related major in mechanical / electrical engineering.
本科及以上機械或電氣工程相關學歷;
· More than 5 years’ work experiences in manufacturing industry of equipment management and,trouble shoot especially in PLC system.
5年及以上制造業設備管理經驗和故障處理,特別是PLC系統;
· Be familiar with TPM.
熟悉TPM
· Have knowledge for PC application
有PC應用知識
· Be familiar with high and lower voltage circuit.
熟悉高低壓配電
· Be familiar with quality system.
熟悉質量體系
· Must have goodcapacity for problem solving.
有良好的問題解決能力