崗位職責:
1)設計、安裝、調試自動化設備,編寫技術文檔(BOM、操作手冊)。
Design, install, and commission automation equipment; draft technical documentation (BOM, manuals).
2)評估設備能力精度與工藝要求的可行性;
Evaluate the equipment accuracy and process requirement feasibility;
3)跟蹤產品品質,監控設備的穩定性;
Track product quality and monitor equipment stability;
4)獨立分析拆解及維修三軸、五軸點膠機、激光焊接機及壓機等等;
Analyze and disassemble independently 3-axis glue dispensing machine ,5-axis glue dispensing machine, laser welding machine and pressing machine, etc;
5)獨立跟進設備及相關組裝制程;
Follow up equipment and related assembly process independently;
6)對產品質量和設備停機時間立即做出響應;
Make immediate action for equipment DT and product quality issue;
7)新設備選型,技術協議擬定,設備安裝、調試和驗收管理;
Be responsible on new equipment selection , technical agreement drafting , equipment installation adjustment and buyoff management;
8)負責編制設備保養要求及設備管理規劃;
Be responsible for revising equipment maintenance and equipment management plan;
9)負責新設備選型及技術規范的信息收集;
Be responsible for new equipment selection and information collection of technology specification;
10)對設備故障組織維修及故障分析,做好預防措施;
Coordinate team for maintenance and analysis of equipment failure, take preventive actions;
11)設備相關文件審核及WI編制;
Review related equipment documents and revise WI ;
12)供應商管理及跟進項目進度.
Be responsible on supplier management and follow up project schedule.
13)設備及夾具DFM review,推動設計變更改善。
Be responsible on DFM review of equipment and fixture , push design change improvement.
任職要求:
1)本科及以上學歷,自動化、電氣工程、機械電子、機電一體化等相關專業, 24屆或25屆海內外畢業生;
Bachelor’s degree or higher in Automation, Electrical Engineering, Mechatronics, or related fields, graduates of 2024 or 2025 from home and abroad;
2)熟悉自動化設備原理(PLC、工業機器人、伺服系統、傳感器、HMI等)。
Proficient in automation equipment principles (PLC, industrial robots, servo systems, sensors, HMIs, etc.)
3)熟悉電氣控制設計(電路圖、接線圖、電氣標準如IEC/GB);
Proficient in electrical control design (circuit diagrams, wiring schematics, standards like IEC/GB).
4)了解機械傳動、氣動/液壓系統(能參與機械結構設計或優化);
Knowledge of mechanical transmission/pneumatic-hydraulic systems (ability to contribute to mechanical design/optimization).‘
5)熟悉自動化線體機構相關經驗;
Be familiar with automation production line structure ,with related experience;
6)熟練使用CAD(如AutoCAD、SolidWorks)、PLC編程軟件(如西門子TIA、三菱GX Works);
Hands-on experience with CAD (e.g., AutoCAD, SolidWorks) and PLC programming tools (e.g., Siemens TIA, Mitsubishi GX Works).
7)了解機器視覺(如Halcon、Cognex);
Machine vision (e.g., Halcon, Cognex);
8)熟悉工業通信協議(Modbus、Profibus、EtherCAT等);
Familiarity with industrial communication protocols (Modbus, Profibus, EtherCAT, etc.);
9)工作自主,有較強的學習能力,思路清晰.較強的表達和溝通協調能力;
Be able to work independently , have the ability of strong learning , clear thinking , good expression , good communication coordination;
10)如項目需求,可以接受國內外出差安排,特殊情況下單次出差時間可能不小于2個月;
If the project needs, can accept domestic and foreign travel arrangements, special circumstances a single trip time may not be less than 2 months;
11)熟練工作中的基本英語,能夠用英語進行有效的口語溝通.
Good skill on basic working English, can communicate effectively with spoken English.