中国僵尸片,亚洲欧美国产另类视频,亚洲精品无码人妻无码,亚洲有码转帖,亚洲欧美精品伊人久久,97精品依人久久久

1．職位描述 Brief description of the position:
1.1 根據PEP，從VFF到EOP，分析并實施措施解決質量問題，優化白車身結構和穩定性，實現全車和白車身質量目標。 構建、重新設計和優化預批量和特種車的質量，以實現預系列構建計劃并實現公司戰略目標。
According to PEP, from VFF to EOP, conduct analysis and implement measures to resolve quality problems and optimize body-in-white structure and stability, to achieve whole vehicle and body-in-white quality Targets. Build, rework and optimize the Quality of Pre-series and Special cars to achieve the Pre-series Build Program and meet company strategic goals.
2．崗位職責Key Tasks:
2.1 分析預批量與批量生產中車身和裝配匹配問題的原因，確定并實施短期/返工和長期解決方案，確保實現產量和質量目標
Analyze causes of matching problems in Body and Assembly in pre-series and series Production, define and implement short-term/rework and long-term solutions to ensure Production Volume and Quality targets are achieved.
2.2 根據工廠質量控制需要，進行匹配問題監控，制定預防措施，減少和預防系列問題。 Carry out matching problem monitoring and develop prevention measures based on factory quality control needs to reduce and prevent series problems.
2.3 按照Bemousterungs的要求，對CP7零件和組件進行裝配試裝配（EBV）和首批匹配質量。對CP7零件進行CP5白車身軟裝配，控制CP5與CP7零件的匹配。Conduct Fitment Trial Assembly (EBV) and first batch matching quality for
CP7 parts and assemblies as required by the Bemuesterungsprozess. Conduct CP5 Body in-white soft assembly of CP7 parts to control CP5 to CP7 part matching.
2.4 設計和制造樣品輔助工具（如3D打印的BEMI）和原型零件，以支持分析并確保滿足生產裝配工藝和質量要求。Design and manufacture sample auxiliary tools (e.g. 3D printed BEMI) and prototype parts to support Analysis and to ensure that Production Assembly Process and Quality requirements are met.
2.5 根據工廠設備管理要求，檢查和維護裝配車間以及試制車間設備中的裝配和尺寸相關的生產設備（裝配輔助工具），以確保穩定和尺寸準確的生產，滿足質量要求，并確保設備可用性滿足批量要求。Inspect and maintain Fitment and dimensionally relevant Production equipment (Fitment Aids) in the Assembly Shops as well as Pilot Hall Workshop equipment as per factory equipment management requirements to ensure stable and dimensionally accurate production that meets quality requirements and ensure equipment availability to meet volume requirements.
2.6根據新項目原型需求計劃進行工藝裝配（PAB）試生產。